Mitsubishi HC 4000 review II

-
This is my first venture back into projector after an initial period spent with an Infocus 4805 in 2005 in a small apartment in Westmead.

It was loads of fun and proved size does matter, and I had dozens of people come by at our little gatherings to gawk at the image, which was simply projected into an empty white wall. It was the time of DVDs and component video, and no one was complaining about picture quality. It was simply too much fun to have a 100" image.

Fast forward to 2011, and after getting a new HT pad, I decided to integrate a projector into the home theatre setup. I wasn't interested in 3D, and was not prepared to spend too much, and for a little under USD 1200 shipped, it was a small investment until I got a nice 70" flatscreen.

First impressions:

 

I am up to the 30th hour and I have some short notes on this unit.

 

-       brightness is pretty decent, you get to leave some lights on and you still get a fairly ok image.

-       but contrasts and blacks are not it's forte

-       I used Pacific, and those night battle scenes exposed the flaws in this DLP projector, where details were simply lost in the shadows.

-       It is almost totally silent in Low Lamp Mode, and when you are watching a movie, the fan noise is not noticable, even when it is used in Standard Lamp Mode.

-       The remote is not too bad and has backlighting

-       I have no issues at all with the rainbow effect, and the project handles motion very well.

-       I use it on a coffee table 3m from a 85" screen, it has an offset of 33%, so do your calculations first, as it has more limited placement options than the typcial LCD projector.

-       There is only 1 HDMI input

-       The zoom allows a 85" image from about 3m or so.

-       At about USD 1200, it's a decent buy and for those who can use it in dark cinematic conditions, it will impress you. But if you need usage in bright conditions, then a TV may be a better choice, but those will cost a lot more and are smaller.

-       In combination with the Anchor Bay chip in my Denon AVR 4311, even free to air programs were pretty decent in SD.

Comments

Post a Comment

Popular posts from this blog

KEF LS 50 Meta review and comparison with the LS50

-
Image
The original KEF LS50 was one of those landmark speakers, a pocket rocket which performed at a much higher level than what it’s price tag might indicate. The original LS50 has been widely reviewed, and is well regarded by audiophiles everywhere.  However it does have some bite in the treble and lacks some deep bass, and works better for music which does not go too deep or with a sub to reinforce the bass. But what it does have is fabulous imaging, which allows you to how off great soundstaging, depth, and definition. If you are into details, you’ll love them. The coaxial design is also wonderful for those who sit a bit off axis. The construction is a marvel in itself and with a modern design, a beautiful gloss finish and a quality build. No wonder it’s loved by music lovers the world over. Now recently KEF has introduced the new KEF Meta. This is an updated version of the original and whilst it can look deceivingly the same, there are significant differences. First a link to the offici
Read more

Dynaudio Heritage Special Speaker Review

-
Image
Dynaudio is a company that has been in the speaker business for more than forty years and prides itself on making most of its components in house, especially the drivers and most of the cabinetry. Through the years they have developed many beloved components for their top end products and have also distilled them down to the masses whenever they launch a special edition. So they have adopted a similar format and take some of their finest drivers, an Esotar 3 tweeter and a woofer derived from the Evidence range and placed them into a more traditional walnut veneer speaker for us to sample.  Thus the Heritage Special (HS) was born. The catch ? Well there are two.. firstly it’s by no means cheap, even though it uses choice components. Second there are only 2500 pairs so if you’re waiting to get one, don’t ! And that’s the sum of my review if you may. If you’re a Dynaudio afficiando, just plonk down the deposit that had planned for the annual summer holiday and get this instead. Now reader
Read more

Setting Up A Mesh Network In Your Home - tips and links

-
Image
If you buy an older place, you need to check if the fibre cable is still working, and you also need to brush up on certain terms: FTP   (first termination point) ONT  (Optical Network Terminal -  also called the modem) connects to the First Termination Point (TP) https://support.myrepublic.com.sg/hc/en-us/articles/115003469974-Basic-ONT-Modem-Information-and-Troubleshooting OpenNet is the local company assigned to install the FTP, now they are called Netlink Trust. Intially they have gotten a bad rep simply because they were overwhelmed. Everyone was going into fibre a few years bad.  You need to call them to do the FTP setup. But first, find out if your home has already been reached by optical fibre. Then check if the line still works. Eg, if your builder has cut the line, then you might be in trouble. Now those chaps will charge you $160 for apartments or $288 for landed properties. You need to give them 2 weeks notice and select from a menu of dates. Then they will su
Read more